|
|
|
|
 |
|
| - |
Best for high throughput screening (HTS) while live cell imaging is proceeding.
|
| - |
Chamlide WP can be used on almost any microscope stage (depending on the stage type, the Chamlide WP
requires a stage adaptor.). The Chamlide WP was designed to fit microscope stages with universal mounting frame K
such as Zeiss or Leica standard stages or most XY-motorized stages.
|
| - |
The controller (CU-109) controls temperatures of the incubator main body, incubator cover, humidifier, and lens warmer, as well as adjust the flow rate of the mixed CO2 gas by using the flow meter (less than 100 ml/min).
|
| - |
The FC-5 or FC-7 can provide optimum mixed gas to all incubator systems such as Chamlide TC, WP, and IC.
|
| - |
Chamlide WP can accept various plastic-bottom or coverslip-bottom well plates (6, 12, 24, 48 or 96 well plates) as well as Chamlide PT (Well plate type magnetic chamber). |
| - |
The offered special glass cover is available for disposable well plates to maintain humidity and provide good
transmission for imaging. |
| - |
It is possible to control the temperature and gas concentration, program temperature and gas concentration gradients, and record the temperature and gas concentration over time using CCP ver 3.8 software or MetaMorph software. |
|
|
 |
|
| Various chambers in the Chamlide WP for 6 well plate |
|
| Commercial 6 well plate |
|
Chamlide PT
(Well plate type magnetic chamber) |
|
Chamlide MB
(6-hole bottom plate) |
|
Chamlidel MD
(6-dishes holder) |
|
|
| - |
The 6 well plate type Chamlide WP can be used with
commercial well plates or Chamlide PT (well plate type magnetic chamber) as well as six commercial 35mm culture dishes or six Chamlide magnetic chambers with their respective adaptors (Chamlide MD (6-dishes holder) or Chamlide MB (6-hole bottom plate)). |
| - |
LCI will custom make Chamlide PT, Chamlide MB, and Chamlide MD which can perfuse fresh medium or inject some drugs.
|
|
|
|
| Chamlide WP for 96 well plate |
|
 |
| 96 well plate type Chamlide WP incubator for high resolution imaging |
|
| - |
In case of the Chamlide WP for 96 well plate, its shape of the incubator main body became to surround every 4 single wells for the easy approach of the objective. It makes high resolution images possible. |
|
|
| Specifications |
| Temperature range |
Ambient +3℃ ~ 45℃ |
| Recommended 5% CO2 / 95% Air flow rate |
40~50 ml/ min |
| Incubator physical dimension (mm) |
Cover |
164(W) x 134(D) x 10(H) |
| Main body |
160(W) x 130(D) x 21(H) |
| Adaptor |
110(W) x 110(D) x 7(H) |
| Heating method |
Cover |
built-in glass heater |
| Main body |
thin layer heater |
| Adaptor |
cartridge heater |
| Lens warmer |
thin layer heater |
| Humidifier bottle volume for humidity |
Maximum 100 ml |
| Sensor |
Thermo-couple |
| Incubator material |
Black anodized aluminum alloy |
|
|
 |
|
|
| Model No.Product |
| WP-S-10A
|
Chamlide WP for 6 well plate
|
| WP-S-10B |
Chamlide WP for 12 well plate
|
| WP-S-10C |
Chamlide WP for 24 well plate
|
| WP-S-10D |
Chamlide WWP-S-10BP
P for 48 well plate
|
| WP-S-10E |
Chamlide WP for 96 well plate |
| WP-S-10AP
|
Chamlide WP for 6 well plate& Prior XY-auto stage |
| WP-S-10BP
|
Chamlide WP for 12 well plate& Prior XY-auto stage
|
| WP-S-10CP
|
Chamlide WP for 24 well plate& Prior XY-auto stage |
| WP-S-10DP |
Chamlide WP for 48well plate& Prior XY-auto stage
|
| WP-S-10EP |
Chamlide WP for 96well plate& Prior XY-auto stage |
| |
|
|
|
 |
 |
|
| Incubator physical dimension (mm)
|
159.5mm (W) x 109.5 (D) x 28.5 (H)
|
| Incubator material |
Black acetal component, black anodized aluminum alloy
|
|
|
| - |
Chamlide WP-A is for use with an Applied Scientific Instrumentation stage with piezo Z top plate. |
| - |
The weight of the incubator body including the adaptor and chamber(s) does not exceed 500g. |
| - |
Other functions and features are the same as the standard type Chamlide WP. |
| - |
The exterior dimensions of the incubator are the same as universal mounting frame K. |
|
|
| Model No.Product |
| WP-S-20A |
Chamlide WP-A for 6 well plate |
| WP-S-20B |
Chamlide WP-A for 12 well plate |
| WP-S-20C |
Chamlide WP-A for 24 well plate |
| WP-S-20D |
Chamlide WP-A for 48 well plate |
| WP-S-20E |
Chamlide WP-A for 96 well plate |
|
| |
|
|
